Peanut Strip Cutting Machine Stainless Steel

The Peanut Strip Cutting Machine consists of hopper, vibration feeding device, knife, cut roll and discharge screen and other parts. After 20 minutes soaking in hot water, peeled peanut can be cut into strip by this machine. Machine prepares half peanut kernel and send to cutters at right place by conveying groove. At the end of grooves, there will be cutter roll with corresponding blades. When peanut kernel pass there blades, will be cut into strip shape. Before using machine, check all driving parts, ensure there isn’t loose parts. After that, check all power connecting wire, bottom, ensure them connect well. All parts checking well, then start vibrating screen, blades, feeder. When finishing working, close feeder, blades, grading vibrating screen. When cutting peanut, in order to keep strip shape well, keep water content at 15%. Before cutting peanut, you’d better grade peanut which can make cut strip uniform. And peanut can not have impurity, in case of damage blades. Last, after some times usage, check and clean machine. 
 

Advantages：

1.High quality, machine is made of stainless steel. 

2.Machine has 44pcs blades, when cutting peanut, all peanut will pass blades through grooves, ensure machine cutting precision. 

3.There are 3 motors on this machine, separated for feeding, vibrating and cutting. Easy to control. 

4.Machine can change discharge screen according to peanut size. 

5.Cutting strip uniform, smoothly and vertical size is long. All blades distance is same, and peanut pass blades all at same line, which make cutting strip uniform.

6.Less waste. Because groove conveyor, peanut pass blades at same direction with blades, when cutting, mostly peanut can be cut into strip, waste is very little.

7.Easy to use and save labor. 

8.Low noise and durable.