The main component of the type fruit vegetable juice extractor equipment
is the spiral.The spiral along the slag exit direction of the main diameter gradually increased and the pitch gradually reduced.When the material is screwed,the formation of the material squeeze for the spiral cavity volume reduction.
The direction of rotation of the helical spindle is seen from the feed hopper to the slag groove direction and is clockwise.
The raw material is fed into the hopper and is pressed under the advance of the screw, and the pressed juice flows into the bottom of the juice through the filter, and the waste is discharged through the annular voids formed between the helical and the tapered portions, The movement of the pan head in the axial direction adjusts the size of the void. For the clockwise (from the slag tank to the feed head to see the hand wheel when the handle, the pressure head to the left, the gap is reduced, otherwise the gap is larger.) Change the size of the gap, that is, adjust the row Slag resistance, you can change the slag rate, but if the gap is too small, in the extrusion, part of the slag particles and juice together through the filter is squeezed out, despite the increase in juice, but the relative quality of the juice decreased Size should be based on user specific process requirements.