Home > Blog >
Blog
Click on me if you are in question:

Pomegranate Arils Separator Processing Machine

Time:2018-04-08 By:wendy

For the pomegranate arils processing, our the pomegranate arils separator machine is your best choice.We will show more about the characteristics of this pomegranate peeling machine that our company provides for you and some of their technical parameters. It helps you understand the machine and can be used as a simple basis for your purchase. Of course, you can also contact us directly by phone, we will recommend for you!

The pomegranate arils peeling machine is one of the special equipment for deep processing of pomegranate. This machine was developed on the basis of the introduction of foreign technologies such as Italy. It is used for the separation of pomegranate and is an essential equipment for the extraction of pomegranate juice. The working principle is that the pomegranate enters the upper crushing device from the feed hopper, and through the relative crushing of the crushing roller and the pressure of the blade on the roller, the whole pomegranate is cut into several small pieces; the crushing roller of the upper crushing device is made of stainless steel, The gap between the two rollers can be adjusted to 20-30mm; then it enters the lower crushing device and is broken for the second time. The lower crushing roller is made of non-toxic high elastic rubber and has less damage to the pomegranate broken seeds. The gap between the two sticks can be adjusted by 10-20mm; After two stages of crushing, the pomegranates, which have been separated from the basic seeds, fall into a separation device (separation shaft and rotating screen combination) that is not equipped with a frequency converter, and the pomegranate seeds and some juices are obtained from the rotation of the separation shaft and the rotating screen. The sieve hole leaks out and enters the next process flow through the discharge port (by the screw pump to the juicer or other;) The pomegranate peel is discharged from the tail of the pomegranate processing machine.

The entire fleet of reducer and part of the transmission components are all made of high-quality stainless steel. Rotary sieve aperture 12-18mm. If your pomegranate variety is special, please clearly note when sending inquiries.Email: wendy@machinehall.com
pomeganate aril separator processing machine

Message

Please Feel free to give your inquiry in the form below.  We will reply you in 24 hours.
Name:
E-mail:
 *
Country:
 
Tel:
 
Instant Messenger:
 
Company:
 
Message:
 *
Verification code:
*
 

Leave Message

Number